Implementation of Egypt Sat-1 Satellite Test Center Using LabVIEW

Mohamed Elhady Keshk; Mohamed Ibrahim; Noran Tobar; Hend Nabil; Mohamed Elemam

doi:doi:10.11648/j.ajsea.20150405.11

| Peer-Reviewed

Implementation of Egypt Sat-1 Satellite Test Center Using LabVIEW

Mohamed Elhady Keshk, Mohamed Ibrahim, Noran Tobar, Hend Nabil, Mohamed Elemam

Published in American Journal of Software Engineering and Applications (Volume 4, Issue 5)

Received: 22 July 2015 Accepted: 10 August 2015 Published: 29 August 2015

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In each stage of any satellite design cycle, it is required to have test system that verifies the operational functions of each satellite subsystem and the integration operation among the satellite subsystems. Usually, these test systems consist of many hardware’s and these hardware’s are very complicated and occupied large space. The first Egyptian satellite, Egypt Sat-1, has a test center; a place where the satellite integration test sequences are carried out. This center consists of complicated hardware. In this paper a new trend, using LabView tool with National Instrument (NI) chassis, is used to build a satellite test center (STC) prototype that reduce the cost, complexity and occupied area of the STC. So the new trend tests the ability to replace the Egypt Sat-1 test center. The results of this paper shows that the quality of the new trend compared to the existed Egypt Sat-1 test center.

Published in	American Journal of Software Engineering and Applications (Volume 4, Issue 5)
DOI	10.11648/j.ajsea.20150405.11
Page(s)	80-85
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2015. Published by Science Publishing Group

Keywords

Satellite Test Center, Space, Engineering Model

References

[1]	M.S. El-Negamy, M.B. Eteiba 1 and G.M. El-Bayoumi, “Modeling and Simulation of Egyptsat-1 Satellite System Powered by Photovoltaic Module”, Journal of American Science p. 110-116, Vol. 9, No.1, 2013.
[2]	Dr. J. Abdul Jaleel, Nazar. A, Omega A R, “Simulation on Maximum Power Point Tracking of the Photovoltaic Module using LabVIEW”, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol. 1, Issue 3, p.190-199, September 2012.
[3]	M. Zahran, M. Okasha and Galina A. Ivanova, “Assessment of Earth Remote Sensing Microsatellite Power Subsystem Capability during Detumbling and Nominal Modes”, Journal of Power Electronics, Vol. 6, No. 1, January 2006.
[4]	“Flight and Camera Electronics for a Satellite System - A NI Multisim National Lab Application”, www.ni.com/white-paper/7829/en/, access: Oct 06, 2013.
[5]	F. Musso, F. Bresciani, L. Bonino, S. Cesare, “NASA uses NI LabVIEW to save time, reduce costs in automated testing of Micro shutters”, military aerospace solutions Conference, pp. 60-62, 2007.
[6]	“Building a Satellite Navigation Test Platform Using the NI Vector Signal Transceiver”www.sine.ni.com/cs/app/doc/p/id/cs-16256.
[7]	G. Huang, A. Soghoyan, D. Akopian, P. Chen, A. Samant, “A Land Mobile Channel Modeling in LabVIEW”, IEEE SMC, San Antonio, TX, pp. 4575-4580, 2009.
[8]	“Galileo Receiver Testing Based on LabVIEW and NI RF Hardware”, www.sine.ni.com/cs/app/doc/p/id/cs-15551.
[9]	Arpine Soghoyan, Grant Huang, Jayanthi Narisetty, David Akopian, “A Comprehensive Labview-Based A-GPS Receiver and Integrated Development, Simulation and Testing Platform”, www.researchgate.net/publication/258567337, jan.2011.
[10]	National Instruments FPGA, www.ni.com/fpga/.

Cite This Article

Plain Text BibTeX RIS

APA Style

Mohamed Elhady Keshk, Mohamed Ibrahim, Noran Tobar, Hend Nabil, Mohamed Elemam. (2015). Implementation of Egypt Sat-1 Satellite Test Center Using LabVIEW. American Journal of Software Engineering and Applications, 4(5), 80-85. https://doi.org/10.11648/j.ajsea.20150405.11

Copy | Download

ACS Style

Mohamed Elhady Keshk; Mohamed Ibrahim; Noran Tobar; Hend Nabil; Mohamed Elemam. Implementation of Egypt Sat-1 Satellite Test Center Using LabVIEW. Am. J. Softw. Eng. Appl. 2015, 4(5), 80-85. doi: 10.11648/j.ajsea.20150405.11

Copy | Download

AMA Style

Mohamed Elhady Keshk, Mohamed Ibrahim, Noran Tobar, Hend Nabil, Mohamed Elemam. Implementation of Egypt Sat-1 Satellite Test Center Using LabVIEW. Am J Softw Eng Appl. 2015;4(5):80-85. doi: 10.11648/j.ajsea.20150405.11

Copy | Download

@article{10.11648/j.ajsea.20150405.11,
  author = {Mohamed Elhady Keshk and Mohamed Ibrahim and Noran Tobar and Hend Nabil and Mohamed Elemam},
  title = {Implementation of Egypt Sat-1 Satellite Test Center Using LabVIEW},
  journal = {American Journal of Software Engineering and Applications},
  volume = {4},
  number = {5},
  pages = {80-85},
  doi = {10.11648/j.ajsea.20150405.11},
  url = {https://doi.org/10.11648/j.ajsea.20150405.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajsea.20150405.11},
  abstract = {In each stage of any satellite design cycle, it is required to have test system that verifies the operational functions of each satellite subsystem and the integration operation among the satellite subsystems. Usually, these test systems consist of many hardware’s and these hardware’s are very complicated and occupied large space. The first Egyptian satellite, Egypt Sat-1, has a test center; a place where the satellite integration test sequences are carried out. This center consists of complicated hardware. In this paper a new trend, using LabView tool with National Instrument (NI) chassis, is used to build a satellite test center (STC) prototype that reduce the cost, complexity and occupied area of the STC. So the new trend tests the ability to replace the Egypt Sat-1 test center. The results of this paper shows that the quality of the new trend compared to the existed Egypt Sat-1 test center.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Implementation of Egypt Sat-1 Satellite Test Center Using LabVIEW
AU  - Mohamed Elhady Keshk
AU  - Mohamed Ibrahim
AU  - Noran Tobar
AU  - Hend Nabil
AU  - Mohamed Elemam
Y1  - 2015/08/29
PY  - 2015
N1  - https://doi.org/10.11648/j.ajsea.20150405.11
DO  - 10.11648/j.ajsea.20150405.11
T2  - American Journal of Software Engineering and Applications
JF  - American Journal of Software Engineering and Applications
JO  - American Journal of Software Engineering and Applications
SP  - 80
EP  - 85
PB  - Science Publishing Group
SN  - 2327-249X
UR  - https://doi.org/10.11648/j.ajsea.20150405.11
AB  - In each stage of any satellite design cycle, it is required to have test system that verifies the operational functions of each satellite subsystem and the integration operation among the satellite subsystems. Usually, these test systems consist of many hardware’s and these hardware’s are very complicated and occupied large space. The first Egyptian satellite, Egypt Sat-1, has a test center; a place where the satellite integration test sequences are carried out. This center consists of complicated hardware. In this paper a new trend, using LabView tool with National Instrument (NI) chassis, is used to build a satellite test center (STC) prototype that reduce the cost, complexity and occupied area of the STC. So the new trend tests the ability to replace the Egypt Sat-1 test center. The results of this paper shows that the quality of the new trend compared to the existed Egypt Sat-1 test center.
VL  - 4
IS  - 5
ER  -

Copy | Download

Author Information

Mohamed Elhady Keshk

Testing and Devleopment of Satellites Systems Group, Egyptian Space Program, NARSS, Cairo, Egypt
Mohamed Ibrahim

Testing and Devleopment of Satellites Systems Group, Egyptian Space Program, NARSS, Cairo, Egypt
Noran Tobar

Testing and Devleopment of Satellites Systems Group, Egyptian Space Program, NARSS, Cairo, Egypt
Hend Nabil

Testing and Devleopment of Satellites Systems Group, Egyptian Space Program, NARSS, Cairo, Egypt
Mohamed Elemam

Testing and Devleopment of Satellites Systems Group, Egyptian Space Program, NARSS, Cairo, Egypt

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Mohamed Elhady Keshk, Mohamed Ibrahim, Noran Tobar, Hend Nabil, Mohamed Elemam. (2015). Implementation of Egypt Sat-1 Satellite Test Center Using LabVIEW. American Journal of Software Engineering and Applications, 4(5), 80-85. https://doi.org/10.11648/j.ajsea.20150405.11

Copy | Download

ACS Style

Mohamed Elhady Keshk; Mohamed Ibrahim; Noran Tobar; Hend Nabil; Mohamed Elemam. Implementation of Egypt Sat-1 Satellite Test Center Using LabVIEW. Am. J. Softw. Eng. Appl. 2015, 4(5), 80-85. doi: 10.11648/j.ajsea.20150405.11

Copy | Download

AMA Style

Mohamed Elhady Keshk, Mohamed Ibrahim, Noran Tobar, Hend Nabil, Mohamed Elemam. Implementation of Egypt Sat-1 Satellite Test Center Using LabVIEW. Am J Softw Eng Appl. 2015;4(5):80-85. doi: 10.11648/j.ajsea.20150405.11

Copy | Download

@article{10.11648/j.ajsea.20150405.11,
  author = {Mohamed Elhady Keshk and Mohamed Ibrahim and Noran Tobar and Hend Nabil and Mohamed Elemam},
  title = {Implementation of Egypt Sat-1 Satellite Test Center Using LabVIEW},
  journal = {American Journal of Software Engineering and Applications},
  volume = {4},
  number = {5},
  pages = {80-85},
  doi = {10.11648/j.ajsea.20150405.11},
  url = {https://doi.org/10.11648/j.ajsea.20150405.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajsea.20150405.11},
  abstract = {In each stage of any satellite design cycle, it is required to have test system that verifies the operational functions of each satellite subsystem and the integration operation among the satellite subsystems. Usually, these test systems consist of many hardware’s and these hardware’s are very complicated and occupied large space. The first Egyptian satellite, Egypt Sat-1, has a test center; a place where the satellite integration test sequences are carried out. This center consists of complicated hardware. In this paper a new trend, using LabView tool with National Instrument (NI) chassis, is used to build a satellite test center (STC) prototype that reduce the cost, complexity and occupied area of the STC. So the new trend tests the ability to replace the Egypt Sat-1 test center. The results of this paper shows that the quality of the new trend compared to the existed Egypt Sat-1 test center.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Implementation of Egypt Sat-1 Satellite Test Center Using LabVIEW
AU  - Mohamed Elhady Keshk
AU  - Mohamed Ibrahim
AU  - Noran Tobar
AU  - Hend Nabil
AU  - Mohamed Elemam
Y1  - 2015/08/29
PY  - 2015
N1  - https://doi.org/10.11648/j.ajsea.20150405.11
DO  - 10.11648/j.ajsea.20150405.11
T2  - American Journal of Software Engineering and Applications
JF  - American Journal of Software Engineering and Applications
JO  - American Journal of Software Engineering and Applications
SP  - 80
EP  - 85
PB  - Science Publishing Group
SN  - 2327-249X
UR  - https://doi.org/10.11648/j.ajsea.20150405.11
AB  - In each stage of any satellite design cycle, it is required to have test system that verifies the operational functions of each satellite subsystem and the integration operation among the satellite subsystems. Usually, these test systems consist of many hardware’s and these hardware’s are very complicated and occupied large space. The first Egyptian satellite, Egypt Sat-1, has a test center; a place where the satellite integration test sequences are carried out. This center consists of complicated hardware. In this paper a new trend, using LabView tool with National Instrument (NI) chassis, is used to build a satellite test center (STC) prototype that reduce the cost, complexity and occupied area of the STC. So the new trend tests the ability to replace the Egypt Sat-1 test center. The results of this paper shows that the quality of the new trend compared to the existed Egypt Sat-1 test center.
VL  - 4
IS  - 5
ER  -

Copy | Download