Injection process is essential for many industrial applications especially in water desalination and water treatment market. The new concept of injection, line bleeding injection pump (LBIP) [8], opens a door for injection processes of simpler and effective injection facilities with relatively low cost and less maintenance requirements. The concept of LBIP is to utilize the pressure inside the line and intensify it to produce higher pressure than the line pressure to inject chemicals inside it. Certain amount of water should be bleed out from the line. The amount of bleed water then could be either recycled back to the line or drained back to the intake. The aim of this study is to develop LBIP design to be double act injection pump. Double-act LBIP design is promising to be more effective and low price design for relatively higher doses injection applications. It has no spring. The developed design will act as two pumps in one unit using very simple design and traditional materials. This concept will take the cost to its minimum value. The double-act LBIP price is promising to be very competitive compared to other injection pump types. Double-act LBIP is equipped with 3 adapters as a simple and accurate variable displacement facility that gives the design a strong potential as metering injection pump with wide range of injection ability (20-1000 liter/day). Both single-act and double-act LBIP designs require no driving power except for the line pressure itself. This concept is promising for researches of developing renewable energy with seawater desalination units in remote areas.
| Published in |
International Journal of Mechanical Engineering and Applications (Volume 3, Issue 1-2)
This article belongs to the Special Issue Advanced Fluid Power Sciences and Technology |
| DOI | 10.11648/j.ijmea.s.2015030102.12 |
| Page(s) | 11-16 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2014. Published by Science Publishing Group |
Injection, Pump, Line Pressure, Double-Act, Line Bleeding
| [1] | United Nations 2001. The State of World Population. World Population Prospects: The 2000 Revision: Highlights. New York: Population Division, Department of Economic and. Social Affairs. 2001 |
| [2] | http://en.wikipedia.org/wiki/Desalination |
| [3] | H. Ettouny and L. Rizzuti. Solar Desalination: Challenge for Sustainable Fresh Water in the 21th Century. Springer. 2007, pp 1-18. |
| [4] | H. Murrenhoff. Grundlagen der fluidtechnik teil 1: Hyraulik. Umdruck zur Vorlesung. Shaker Verlag GmbH. Germany. 2005. |
| [5] | Product news. WORLD PUMPS. September 2014. |
| [6] | V. A. Kurteev. Diaphragms for pneumatic pumps. Chemical and Petroleum Engineering. Vol. 47, Nos 7-8, 2011, pp. 550-556 |
| [7] | S. Reynolds. Fully MR-compatible syringe pump for the controllable injection of hyperpolarized substrate in animals. Springer Verlag, Applied Magnetic Resonance, 2012 |
| [8] | Mohamed Elashmawy. Novel Injection Concept: Line Bleeding Injection Pump (LBIP). Science Innovation. Vol. 2, No. 4, 2014, pp. 37-42. doi: 10.11648/j.si.20140204.11 |
APA Style
Mohamed Elashmawy, Mohammad Alnais. (2014). Developed Design for Line Bleeding Injection Pump: Double-Act LBIP. International Journal of Mechanical Engineering and Applications, 3(1-2), 11-16. https://doi.org/10.11648/j.ijmea.s.2015030102.12
ACS Style
Mohamed Elashmawy; Mohammad Alnais. Developed Design for Line Bleeding Injection Pump: Double-Act LBIP. Int. J. Mech. Eng. Appl. 2014, 3(1-2), 11-16. doi: 10.11648/j.ijmea.s.2015030102.12
AMA Style
Mohamed Elashmawy, Mohammad Alnais. Developed Design for Line Bleeding Injection Pump: Double-Act LBIP. Int J Mech Eng Appl. 2014;3(1-2):11-16. doi: 10.11648/j.ijmea.s.2015030102.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ijmea.s.2015030102.12,
author = {Mohamed Elashmawy and Mohammad Alnais},
title = {Developed Design for Line Bleeding Injection Pump: Double-Act LBIP},
journal = {International Journal of Mechanical Engineering and Applications},
volume = {3},
number = {1-2},
pages = {11-16},
doi = {10.11648/j.ijmea.s.2015030102.12},
url = {https://doi.org/10.11648/j.ijmea.s.2015030102.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.s.2015030102.12},
abstract = {Injection process is essential for many industrial applications especially in water desalination and water treatment market. The new concept of injection, line bleeding injection pump (LBIP) [8], opens a door for injection processes of simpler and effective injection facilities with relatively low cost and less maintenance requirements. The concept of LBIP is to utilize the pressure inside the line and intensify it to produce higher pressure than the line pressure to inject chemicals inside it. Certain amount of water should be bleed out from the line. The amount of bleed water then could be either recycled back to the line or drained back to the intake. The aim of this study is to develop LBIP design to be double act injection pump. Double-act LBIP design is promising to be more effective and low price design for relatively higher doses injection applications. It has no spring. The developed design will act as two pumps in one unit using very simple design and traditional materials. This concept will take the cost to its minimum value. The double-act LBIP price is promising to be very competitive compared to other injection pump types. Double-act LBIP is equipped with 3 adapters as a simple and accurate variable displacement facility that gives the design a strong potential as metering injection pump with wide range of injection ability (20-1000 liter/day). Both single-act and double-act LBIP designs require no driving power except for the line pressure itself. This concept is promising for researches of developing renewable energy with seawater desalination units in remote areas.},
year = {2014}
}
TY - JOUR T1 - Developed Design for Line Bleeding Injection Pump: Double-Act LBIP AU - Mohamed Elashmawy AU - Mohammad Alnais Y1 - 2014/11/25 PY - 2014 N1 - https://doi.org/10.11648/j.ijmea.s.2015030102.12 DO - 10.11648/j.ijmea.s.2015030102.12 T2 - International Journal of Mechanical Engineering and Applications JF - International Journal of Mechanical Engineering and Applications JO - International Journal of Mechanical Engineering and Applications SP - 11 EP - 16 PB - Science Publishing Group SN - 2330-0248 UR - https://doi.org/10.11648/j.ijmea.s.2015030102.12 AB - Injection process is essential for many industrial applications especially in water desalination and water treatment market. The new concept of injection, line bleeding injection pump (LBIP) [8], opens a door for injection processes of simpler and effective injection facilities with relatively low cost and less maintenance requirements. The concept of LBIP is to utilize the pressure inside the line and intensify it to produce higher pressure than the line pressure to inject chemicals inside it. Certain amount of water should be bleed out from the line. The amount of bleed water then could be either recycled back to the line or drained back to the intake. The aim of this study is to develop LBIP design to be double act injection pump. Double-act LBIP design is promising to be more effective and low price design for relatively higher doses injection applications. It has no spring. The developed design will act as two pumps in one unit using very simple design and traditional materials. This concept will take the cost to its minimum value. The double-act LBIP price is promising to be very competitive compared to other injection pump types. Double-act LBIP is equipped with 3 adapters as a simple and accurate variable displacement facility that gives the design a strong potential as metering injection pump with wide range of injection ability (20-1000 liter/day). Both single-act and double-act LBIP designs require no driving power except for the line pressure itself. This concept is promising for researches of developing renewable energy with seawater desalination units in remote areas. VL - 3 IS - 1-2 ER -
Email: