The most important running cost item in evaporation is energy. However, energy consumption per unit production can be reduced considerably through the use of multi effect evaporation. A multiple effect evaporation scheme was studied and economically analyzed. Different economic items, including cost of steam and cost of evaporator in addition to annual total cost for single, double, three, four, five and six effects of evaporators were estimated and analyzed. The results indicated that minimum annual total cost is obtained by using a double effect evaporator.
Published in |
American Journal of Energy Engineering (Volume 3, Issue 2-1)
This article belongs to the Special Issue Energy Conservation in Food Industry |
DOI | 10.11648/j.ajee.s.2015030201.12 |
Page(s) | 6-11 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2015. Published by Science Publishing Group |
Multiple Effect Evaporators, Optimum Number of Effects, Annual Cost, Evaporator Cost, Steam Cost
[1] | P. D. Smith, C.L. E. Swartz and S. T. L. Harrison, Control and Optimization of a Multiple effect evaporator, Proc. S. Afr. Sug. Technol. Ass., 2000, 74, pp. 274-279 |
[2] | H. Nuñez1, R. Simpson, S. Almonacid, and A. Abakarov, A study of different multi effect evaporators designed for Thermal processing of tomato paste: optimization and quality Evaluation", International Conference in Food Innovation, 2010. |
[3] | D. Kern, Procesos de Transferencia de Calor. Editorial Continental, S.A. México, 1999 |
[4] | J. S. Dhara, G. Bhagchandanc, Design, Modelling and Simulation of Multiple Effect Evaporators. International Journal of Scientific Engineering and Technology, 2012, 1, pp.01-05. |
[5] | V. Jaishree, Optimization of a multiple Effect Evaporator System, A Thesis submitted to the National Institute of Technology, Rourkela In partial fulfillment of the requirements of Bachelor of Technology (Chemical Engineering) Department of Chemical Engineering National institute of technology, Rourkela, Orissa, 2010, pp. 769, India. |
[6] | S. Gunajit, D. B. Surajit, Energy Management in Multiple-Effect Evaporator System: A Heat Balance AnalysisApproach, Gen. Math. Notes, 2010, 1, pp. 84-88 |
[7] | G.V. Barbosa-Cánovas, P. Juliano and M. Peleg. Engineering properties of foods, In: Food engineering. Encyclopedia of life support sciences, Barbosa-Cánovas G.V. (Ed.). EOLSS Publishers/UNESCO, Paris, France, 2005. |
[8] | M. A. Sorour, A comparative study of energy conservation methods in juice concentration by evaporation, Faculty of Eng., Cairo University, 2001, pp. 57–66. |
[9] | M. S. Peter, K. D. Timmerhaus, Plant Design and Economics for Chemical Engineers, 4th Ed., McGraw Hill, New York, 1991. |
[10] | B. G. Liptak, Process Control Trends, Control, March, May, and July, 2004. |
APA Style
Manal A. Sorour. (2015). Optimization of Multiple Effect Evaporators Designed for Fruit Juice Concentrate. American Journal of Energy Engineering, 3(2-1), 6-11. https://doi.org/10.11648/j.ajee.s.2015030201.12
ACS Style
Manal A. Sorour. Optimization of Multiple Effect Evaporators Designed for Fruit Juice Concentrate. Am. J. Energy Eng. 2015, 3(2-1), 6-11. doi: 10.11648/j.ajee.s.2015030201.12
AMA Style
Manal A. Sorour. Optimization of Multiple Effect Evaporators Designed for Fruit Juice Concentrate. Am J Energy Eng. 2015;3(2-1):6-11. doi: 10.11648/j.ajee.s.2015030201.12
@article{10.11648/j.ajee.s.2015030201.12, author = {Manal A. Sorour}, title = {Optimization of Multiple Effect Evaporators Designed for Fruit Juice Concentrate}, journal = {American Journal of Energy Engineering}, volume = {3}, number = {2-1}, pages = {6-11}, doi = {10.11648/j.ajee.s.2015030201.12}, url = {https://doi.org/10.11648/j.ajee.s.2015030201.12}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajee.s.2015030201.12}, abstract = {The most important running cost item in evaporation is energy. However, energy consumption per unit production can be reduced considerably through the use of multi effect evaporation. A multiple effect evaporation scheme was studied and economically analyzed. Different economic items, including cost of steam and cost of evaporator in addition to annual total cost for single, double, three, four, five and six effects of evaporators were estimated and analyzed. The results indicated that minimum annual total cost is obtained by using a double effect evaporator.}, year = {2015} }
TY - JOUR T1 - Optimization of Multiple Effect Evaporators Designed for Fruit Juice Concentrate AU - Manal A. Sorour Y1 - 2015/02/14 PY - 2015 N1 - https://doi.org/10.11648/j.ajee.s.2015030201.12 DO - 10.11648/j.ajee.s.2015030201.12 T2 - American Journal of Energy Engineering JF - American Journal of Energy Engineering JO - American Journal of Energy Engineering SP - 6 EP - 11 PB - Science Publishing Group SN - 2329-163X UR - https://doi.org/10.11648/j.ajee.s.2015030201.12 AB - The most important running cost item in evaporation is energy. However, energy consumption per unit production can be reduced considerably through the use of multi effect evaporation. A multiple effect evaporation scheme was studied and economically analyzed. Different economic items, including cost of steam and cost of evaporator in addition to annual total cost for single, double, three, four, five and six effects of evaporators were estimated and analyzed. The results indicated that minimum annual total cost is obtained by using a double effect evaporator. VL - 3 IS - 2-1 ER -