Ketonisation of pentanoic acid over bulk cobalt-molybdenum and its supported catalysts in the gas-phase was investigated using a fixed bed reactor under atmospheric pressure at 320-420°C. Compared to other supported catalysts, 20% Co-Mo/Al2O3 demonstrated the best catalytic performance and stability giving to give 95% 5-nonanoe selectivity at 91% pentanoic acid conversion at 308°C and ambient pressure for 5 h time on stream (TOS).However, its stability was e for 15 h TOS with small catalytic deactivation. In this study, catalytic characterization was determined using TGA and BET surface area analyses while acidity was measured using FTIR spectroscopy.
Published in | Science Journal of Chemistry (Volume 6, Issue 1) |
DOI | 10.11648/j.sjc.20180601.12 |
Page(s) | 11-16 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2018. Published by Science Publishing Group |
Ketonisation, Pentanoic Acid, Co-Mo Catalysts, Supported Catalysts, 5-Nonanone
[1] | E. L. Kunkes, D. A. Simonetti, R. M. West, J. C. Serrano-Ruiz, C. A. Gartner, J. A. Dumesic, Science, 322, 2008, 417-421. |
[2] | C. A. Gaertner, J. C. Serrano-Ruiz, D. J. Braden, J. A. Dumesic, Journal of Catalysis, 266, 2009, 71-78. |
[3] | C. A. Gaertner, J. C. Serrano-Ruiz, D. J. Braden, J. A. Dumesic, ChemSusChem., 2, 2009, 1121-1124. |
[4] | E. Karimi, C. Briens, F. Berruti, S. Moloodi, T. Tzanetakis, M. J. Thomson, M. Schlaf, Energy Fuel, 24, 2010, 6586-6600. |
[5] | Ryan W. Snell, Brent H. Shonks, Applied Ctalysis A: General, 451, 2013, 86-93. |
[6] | M. A. Hasan, M. I. Zaki, I. Pasupulety. Applied Catalysis A: General, 243, 2003, 81-92. |
[7] | M. A. Alotaibi, E. F. Kozhevnikova and. V. Kozhevnikov, Applied Catalysis A: General, 2012, 447-448, 32-40. |
[8] | H. Bayahia, E. Kozhevnikov and I. Kozhevnikov, Chemical Communication, 2013, 49, 3842-3844. |
[9] | M. Renz, European Journal of Organic Chemistry, 2005, 979-988. |
[10] | T. N. Pham, T. Sooknoi, S. P. Crossley and D. E. Resasco, ACS Catalysis, 2013, 3, 2456-2473. |
[11] | A. D. Murkute, J. E. Jackson and D. J. Miller, Journal of Catalysis, 2011, 278, 189-199. |
[12] | T. Yokoyama and N. Yamagata, Applied Catalysis A: General, 2001, 221, 227-239. |
[13] | J. A. Martens, M. Wydoodt, P. Espeel and P. A. Jacobs, Editon edn., 1993, vol. 78, pp. 527-534. |
[14] | O. Nagashima, S. Sato, R. Takahashi and T. Sodesawa, Journal of Molecular Catalysis A: Chemical, 2005, 227, 231-239. |
[15] | C. A. Gaertner, J. C. Serrano-Ruiz, D. J. Braden and J. A. Dumesic, Industrial and Engineering Chemistry Research, 2010, 49, 6027-6033. |
[16] | H. Benaissa, P. N. Davey, Y. Z. Khimyak and I. V. Kozhevnikov, Journal of Catalysis, 2008, 253, 244-252. |
[17] | H. Benaissa, P. N. Davey, E. F. Kozhevnikova and I. V. Kozhevnikov, Applied Catalysis A: General, 2008, 351, 88-92. |
[18] | M. Gliński, and J. Kijeński, Applied Catalysis A, General, 2000, 190, 87-91. |
[19] | H. Bayahia, E. F. Kozhevnikova and I. V. Kozhevnikov, Applied Catalysis B: Environmental, 2015, 165, 253-259. |
[20] | Stephen D. Davidson, Kurt A. Spies, Donghai Mei, Libor Kovarik, Igor Kutnyakov, Xiaohong S. Li, Vanessa Lebarbier Dagle, Karl O. Albrecht, and Robert A. Dagle, ACS Sustainable Chem. Eng., 5 (10), 2017, 9136–9149. |
[21] | Mohammed Saad Mutlaq Al-Ghamdi and Hossein Bayahia, Mediterranean Journal of Chemistry, 6, 2017, 1-6. |
[22] | Hossein Bayahia, Asian Journal of Chemistry, 28, 2016, 2744-2748. |
[23] | Hossein Bayahia, Journal of Taibah University for Science, DIO: 10.1080/16583655.2018.1451064, 2018, 1-6. https://doi.org/10.1080/16583655.2018.1451064 |
[24] | A. Aoussi, A. W. Apblett, Z. A. Al-Othman and A. Al-Amro, Transition Metal Chemistry, 35, 927, 2010. |
[25] | C. S. Song, C. S. Hsu, and I. Mochida, Chemistry for Desel, Applied Energy Technology series, 140, 2000. |
[26] | M. Arend, T. Nonnen, W. F. Hoeldrich, J. Fischer, and J. Groos, Applied Catalyst: A, 447, 32, 2013. |
[27] | Morris D. Argyle and Calvin H. Bartholomew, Catalysis, 2015, 5(1), 145-269. |
APA Style
Hossein Bayahia. (2018). Catalytic Activity of Cobalt-Molybdenum in Gas-Phase Ketonisation of Pentanoic Acid. Science Journal of Chemistry, 6(1), 11-16. https://doi.org/10.11648/j.sjc.20180601.12
ACS Style
Hossein Bayahia. Catalytic Activity of Cobalt-Molybdenum in Gas-Phase Ketonisation of Pentanoic Acid. Sci. J. Chem. 2018, 6(1), 11-16. doi: 10.11648/j.sjc.20180601.12
AMA Style
Hossein Bayahia. Catalytic Activity of Cobalt-Molybdenum in Gas-Phase Ketonisation of Pentanoic Acid. Sci J Chem. 2018;6(1):11-16. doi: 10.11648/j.sjc.20180601.12
@article{10.11648/j.sjc.20180601.12, author = {Hossein Bayahia}, title = {Catalytic Activity of Cobalt-Molybdenum in Gas-Phase Ketonisation of Pentanoic Acid}, journal = {Science Journal of Chemistry}, volume = {6}, number = {1}, pages = {11-16}, doi = {10.11648/j.sjc.20180601.12}, url = {https://doi.org/10.11648/j.sjc.20180601.12}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjc.20180601.12}, abstract = {Ketonisation of pentanoic acid over bulk cobalt-molybdenum and its supported catalysts in the gas-phase was investigated using a fixed bed reactor under atmospheric pressure at 320-420°C. Compared to other supported catalysts, 20% Co-Mo/Al2O3 demonstrated the best catalytic performance and stability giving to give 95% 5-nonanoe selectivity at 91% pentanoic acid conversion at 308°C and ambient pressure for 5 h time on stream (TOS).However, its stability was e for 15 h TOS with small catalytic deactivation. In this study, catalytic characterization was determined using TGA and BET surface area analyses while acidity was measured using FTIR spectroscopy.}, year = {2018} }
TY - JOUR T1 - Catalytic Activity of Cobalt-Molybdenum in Gas-Phase Ketonisation of Pentanoic Acid AU - Hossein Bayahia Y1 - 2018/05/08 PY - 2018 N1 - https://doi.org/10.11648/j.sjc.20180601.12 DO - 10.11648/j.sjc.20180601.12 T2 - Science Journal of Chemistry JF - Science Journal of Chemistry JO - Science Journal of Chemistry SP - 11 EP - 16 PB - Science Publishing Group SN - 2330-099X UR - https://doi.org/10.11648/j.sjc.20180601.12 AB - Ketonisation of pentanoic acid over bulk cobalt-molybdenum and its supported catalysts in the gas-phase was investigated using a fixed bed reactor under atmospheric pressure at 320-420°C. Compared to other supported catalysts, 20% Co-Mo/Al2O3 demonstrated the best catalytic performance and stability giving to give 95% 5-nonanoe selectivity at 91% pentanoic acid conversion at 308°C and ambient pressure for 5 h time on stream (TOS).However, its stability was e for 15 h TOS with small catalytic deactivation. In this study, catalytic characterization was determined using TGA and BET surface area analyses while acidity was measured using FTIR spectroscopy. VL - 6 IS - 1 ER -