The ship noise causes marine pollution problems. The gear transmission contributes a significant part to ship noise. The replacement of regular gears by novel 3D point contact tooth gears is considered. The reduced noise levels up to 19 dBA are the advantages of transmissions based on invented gears having 3D point system of engaging. The implementation of invented novel transmission gives the opportunity of providing the industry by safe equipment allowing reduce the important component of ocean pollution, i.e. noise pollution.
| Published in |
Journal of Water Resources and Ocean Science (Volume 4, Issue 1-1)
This article belongs to the Special Issue Safe Technology and Pollution Free Environment |
| DOI | 10.11648/j.wros.s.2015040101.12 |
| Page(s) | 11-19 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2014. Published by Science Publishing Group |
Ship Gear Transmission, 3D Point Contact Tooth Gears, Tooth Contact Stresses, Marine Noise Pollution
| [1] | D. Ross, On Ocean Underwater Ambient Noise. Institute of Acoustics Bulletin, St Albans, Herts, UK: Institute of Acoustics, 18. 1993, pages 5-8. |
| [2] | Megan F. McKenna. Donald Ross, Sean M. Wiggins, John A. Hildebrand. Underwater radiated noise from modern commercial ships. Journal of Acoustic Society of America. 131 (1), January 2012, pages 92-103. |
| [3] | Mark A. McDonald, John A. Hildebrand, Sean M. Wiggins, Donald Ross. A 50 Year comparison of ambient ocean noise near San Clemente Island: A bathymetrically complex coastal region off Southern California. Journal of Acoustic Society of America. 124 (4), October 2008, pages 1985–1992. |
| [4] | IFAW. Ocean Noise: Turn it down. A report on ocean noise pollution. June 2008. 42 pages. |
| [5] | Linda S. Weilgart. The Impact of Ocean Noise Pollution on Marine Biodiversity. Ocean Noise Coalition. Report. Halifax, Canada, 2009. 6 pages. |
| [6] | Hertz H. Über die Berührug fester elastisher Körper / H. Hertz. // J. für Reine und Angewandte Mathematik. 1881. — Bd. 92. |
| [7] | Hertz H. Über die Berührug fester elastisher Körper und über die Härte / H. Hertz // Varhandlungen des Vereine zur Beforderung des Geverbefleisses. — Berlin. Nov.1882.— 449 pages. |
| [8] | Hertz H. Gesammele Werke / H. Hertz. — Leipzig. 1895. — Bd. 1. — S. 155—196. |
| [9] | Alexei P. Popov. Contact Strength of Geared Mechanisms. Nikolaev. NUK, 2008. 580 pages. |
| [10] | Alexei P. Popov. Geared Mechanisms with point contact of teeth. Nikolaev. ATOLL, 2010. 774 pages. |
| [11] | D. N. Reshetov. Parts of Machines. Moscow. Machine-building. 1963. 723 pages. |
| [12] | Shuting Li. Finite element analyses for contact strength and bending strength of a pair of spur gears with machining errors, assembly errors and tooth modifications. Mechanism and Machine Theory, Vol. 42, 2007, pages 88–114, |
| [13] | A. Kahraman, R. Singh. Interactions between Time-varying Mesh Stiffness and Clearance Non-Linearities in a Geared System. Journal of Sound and Vibration, Vol. 146,135–156, 1991. |
| [14] | L. Walha, T. Fakhfakh, M. Haddar. Nonlinear dynamics of a two-stage gear systems with mesh stiffness fluctuation, bearing flexibility and backlash. Mechanism and Machine Theory, Vol. 44,1058–1069, 2009. |
| [15] | Konstandinos G. Raptis, Theodore N. Costopoulos, Georgios A. Papadopoulos and Andonios D. Tsolakis. Rating of Spur Gear Strength Using Photoelasticity and the Finite Element method, American Journal of Engineering and Applied Sciences, 2010,3(1), pages 222-231. |
| [16] | Faydor L. Litvin, Alfonso Fuentes, Claudio Zanzia, Matteo Pontiggiaa. Design, generation, and stress analysis of two versions of geometry of face-gear drives. Mechanism and Machine Theory. Volume 37, Issue 10, October 2002, Pages 1179–1211. |
| [17] | J.J. Kalker, Transient rolling contact phenomena. Proceedings 25th ASLE meeting, Chicago, Ill. ASLE, New York, 1971, pages 177-184 |
| [18] | J. J. Kalker, On the uniqueness of contact problems in the theory of elasticity, Report 387, Laboratory of engineering mechanics,Delft University of Technology. 1971 |
| [19] | J.J. Kalker, A survey of the mechanics of contact between solid bodies. Zeitschrift für Angewandte Mathematik und Mechanik 57. 1977, pages T3-T17. |
| [20] | Biot M. A., 1937, "Bending of an infinite beam on an elastic foundation," Journal of Applied Mechanics Transactions of the ASME, Vol. 59, A1-A7. |
| [21] | Bowles, J. E., 1968, Foundation Analysis and Design, McGraw-Hill Book Co., New York. |
| [22] | Cheung, Y. K., and Zienkiewicz, O. C, 1965, "Plates and tanks on elastic foundations- An application of finite-element method," International Journal of Solids and Structures. Vol. 1, pages 451-461. |
| [23] | R. V. Fediakin, V.A. Chesnokov. Calculations for cylindrical Novikov’s transmissions and friction transmissions. Proceeding of VVIA. Moscow. 1982. 144 pages. |
| [24] | M. I. Makushin. Stressed condition and strength in contact. Proceedings of Department of Resistance of Materials. MVTU. Moscow. 1947, pages79 -145. |
| [25] | George Nerubenko et al. Atlas of Gear Boxes and Transmissions. Nikolaev, 1990. 32 pages |
| [26] | George Nerubenko et al. The exploitation of ship deck mechanisms. HANDBOOK. Moscow, Transport, 1991. 198 pages. |
| [27] | VNIIMASH. Novikov’s transmission with tooth surface hardness HB > 350. Strength calculations. Methodical recommendations. Moscow. 1987. 86 pages. |
| [28] | IMASH RAN. Influence of sag on determination of load in gearing and between satellites in planetary transmission. Moscow. 2009. 30 pages. |
| [29] | Alexei P. Popov. Gear Mesh. Ukrainian Patent № 77634. Published 15.12.2006. |
| [30] | Alexei P. Popov. Gear Transmission of Popov A. P. Ukrainian Patent № 81008. Published26.11.2007. |
| [31] | Alexei P. Popov. Gear Transmission with equally strengthen mesh of involute teeth. Ukrainian Patent №84606. Published 10.11.2008. |
| [32] | Davis, J. Gear Materials, Properties and Manufacture. Materials Park OH: ASM International. 2005. |
| [33] | Dudley, D. W. Handbook of Practical Gear Design. Lancaster: Technomic Publishing Company. 1994. |
| [34] | Mats Åkerblom. Gearbox Noise, Correlation with Transmission Error and Influence of Bearing Preload. Doctoral Thesis in Machine Design. Department of Machine Design. Royal institute of Technology. SE100 44 Stockholm, Sweden. 2008. |
| [35] | Shawki S. Abouel-Seoud, Eid S. Mohamed, Ahmed A. Abdel-Hamid, Ahmed S. Abdallah. Analytical Technique for Predicting Passenger Car Gearbox Structure Noise Using Vibration Response Analysis. British Journal of Applied Science & Technology. 3(4): 2013, pages 860-883. |
| [36] | Satya D. Pradhuman. Cirrus Research. Approach and Methodology. 303 S. Broadway, Suite 212, Tarrytown, New York 10591. 2010. |
| [37] | William J. Atherton, Adam Pintz, David G. Lewicki. Automated Acoustic Intensity Measurements and the Effect of Gear Tooth Profile on Noise. Cleveland State University. 1987. Mechanical Engineering Faculty Publications. Paper 4. |
APA Style
Alexei Popov, George Nerubenko. (2014). The Role of Novel 3D Point Contact Transmission in Ship Noise Pollution Reduction. Journal of Water Resources and Ocean Science, 4(1-1), 11-19. https://doi.org/10.11648/j.wros.s.2015040101.12
ACS Style
Alexei Popov; George Nerubenko. The Role of Novel 3D Point Contact Transmission in Ship Noise Pollution Reduction. J. Water Resour. Ocean Sci. 2014, 4(1-1), 11-19. doi: 10.11648/j.wros.s.2015040101.12
AMA Style
Alexei Popov, George Nerubenko. The Role of Novel 3D Point Contact Transmission in Ship Noise Pollution Reduction. J Water Resour Ocean Sci. 2014;4(1-1):11-19. doi: 10.11648/j.wros.s.2015040101.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.wros.s.2015040101.12,
author = {Alexei Popov and George Nerubenko},
title = {The Role of Novel 3D Point Contact Transmission in Ship Noise Pollution Reduction},
journal = {Journal of Water Resources and Ocean Science},
volume = {4},
number = {1-1},
pages = {11-19},
doi = {10.11648/j.wros.s.2015040101.12},
url = {https://doi.org/10.11648/j.wros.s.2015040101.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.wros.s.2015040101.12},
abstract = {The ship noise causes marine pollution problems. The gear transmission contributes a significant part to ship noise. The replacement of regular gears by novel 3D point contact tooth gears is considered. The reduced noise levels up to 19 dBA are the advantages of transmissions based on invented gears having 3D point system of engaging. The implementation of invented novel transmission gives the opportunity of providing the industry by safe equipment allowing reduce the important component of ocean pollution, i.e. noise pollution.},
year = {2014}
}
TY - JOUR T1 - The Role of Novel 3D Point Contact Transmission in Ship Noise Pollution Reduction AU - Alexei Popov AU - George Nerubenko Y1 - 2014/11/24 PY - 2014 N1 - https://doi.org/10.11648/j.wros.s.2015040101.12 DO - 10.11648/j.wros.s.2015040101.12 T2 - Journal of Water Resources and Ocean Science JF - Journal of Water Resources and Ocean Science JO - Journal of Water Resources and Ocean Science SP - 11 EP - 19 PB - Science Publishing Group SN - 2328-7993 UR - https://doi.org/10.11648/j.wros.s.2015040101.12 AB - The ship noise causes marine pollution problems. The gear transmission contributes a significant part to ship noise. The replacement of regular gears by novel 3D point contact tooth gears is considered. The reduced noise levels up to 19 dBA are the advantages of transmissions based on invented gears having 3D point system of engaging. The implementation of invented novel transmission gives the opportunity of providing the industry by safe equipment allowing reduce the important component of ocean pollution, i.e. noise pollution. VL - 4 IS - 1-1 ER -
Email: